Creality UW-03 Wash & Cure Station

The Creality UW-03 Wash & Cure Station is an efficient 2-in-1 wash & cure solution for post-processing resin models. With a powerful whirlpool in wash mode and stable performance in curing mode, the device facilitates and accelerates the final step of the 3D printing process – with precise control of light, speed and curing time of 3D printed parts. Large, square turntable Even though the Creality UW-03 is smaller in itself, it has been equipped with a larger square turntable to accommodate larger models or multiple printed parts at the same time: Curing volume of 10.64 L (215 x 165 x 300 mm), 13.7% larger. Magnetic propeller for particularly stubborn resin residues The Creality UW-03 uses a powerful magnetic propeller that creates a huge vortex of water or alcohol to remove even the most stubborn resin residue from figures and miniatures. The propeller rotates at a speed of 500 rpm, increasing the water speed by 31%. Practical anti-roll turntable Compared to other Wash & Cure stations, the Creality UW-03 Wash & Cure Station is more focused on stability. The square turntable has a raised edge that effectively prevents 3D models from being swept away by the vortex. The turntable is also equipped with 4 spherical load points for greater stability. 360° UV all-round curing First and foremost, the Creality UW-03 impresses with an optimised arrangement of 18 405 nm UV LEDs, which ensure intensive UV exposure and quickly harden the finished model. The rotating platform ensures 360° UV treatment and hardens the models evenly from all angles. ⇒ > 20000 µW/cm² light intensity in the center More flexibility for washing and curing With the Creality UW-03 you have several options for washing and curing your 3D printed models: Washing basket for full utilisation of the 6.72 L washing volume (210 x 160 x 200 mm), Hanging washing or direct washing of prints attached to a build plate (compatible with 8.9 to 10.3 inch platforms), Basket wash cycle is suitable for irregularly shaped prints, Conventional curing on the turntable for careful placement of each print. Safety first! Even though the tinted lid blocks 99.9% of eye-damaging UV light, please do not stare into the UV light under any circumstances. The curing process will stop if the UV blocking lid is not installed. The washing tank is completely sealed to prevent leakage, spillage or evaporation of liquid during the washing process. User-friendly buttons for control The speed and timer for the WASH/CURE processes can be adjusted in seconds – depending on the type of resin, model size and complexity, of course. The physical buttons provide tactile cues during operation. Technical specifications: Device size 325x303x436mm Net weight 5.4kg Washing volume 210 x 160 x 200 mm (6.72 L) Curing volume 215 x 165 x 300 mm (10.64 L) UV wavelength 405nm UV LEDs 18 pcs Timer setting 5–30 minutes Speed ​​mode fast/normal Service Physical buttons Container material PP Basket material Stainless steel Voltage Input 100–240V; Output DC 24V Rated capacity 60W UI languages English, Mandarin